turn table
英 [tɜːn ˈteɪbl]
美 [tɜːrn ˈteɪbl]
网络 转盘; 转台; 转向表; 回转台; 旋转台
双语例句
- His whole mind was concentrated on one thing only--how to turn table on the enemy.
他的整个思想只专注在一个问题上--如何反攻敌人。 - Turn this table and place it crosswise.
把桌子横过来。 - To turn a table into a compressed table, use alter table
为了将一个表转换成压缩表，可以使用altertable - Be careful not to turn the table upside down.
当心别把桌子弄翻了。 - Just for fun, guests can turn the table and entertain the parents with their predictions for certain Baby features to be Mom's or Dad's.
只是为了娱乐，客人可以把表及娱乐的父母与他们的预测，对于某些婴儿的特点是妈妈的或爸爸的。 - The research for servo control of the turn table based on velocity-observer
基于速度观测器的转台伺服控制技术研究 - On the basis of Euler equation, dynamical equations of frames of the turn table are made, which are the base for the docking dynamics analysis of the test facility.
根据欧拉方程，推导了转动装置各框架的动力学方程，为试验台动力学分析打下了基础。 - And of course when someone else picks the dishes you are not gonna turn the table at that time, turn lazy Susan at that time.
另外还要注意当别人夹菜的时候，这个时候你最好不要转动这个小桌子。 - According to the compose movement of position axis and direction axis, the turn table can achieve the two-dimension movement control.
双轴速率转台通过方位轴和俯仰轴的合成运动，实现二维控制。 - Application of torque ripple rejection based on internal model principle in test turn table
内模原理在转台波动力矩抑制中的应用 - Control system for high-precision turn table
高精密伺服转台控制系统的设计 - A theoretical analysis shows that the two high sensitive axes of the SuperSTAR accelerometer with a resolution of 10-10 m/ s2 used in GRACE mission can be calibrated by rotating a spherical attracting mass with a turn table.
理论分析结果表明，通过回转台旋转一个球体吸引质量，可以对分辨率达到10-10m/s2的GRACE卫星SuperSTAR静电悬浮加速度计的2个高灵敏轴进行在轨标定。 - Auto-test Method and Its Realization of High Accuracy and Low-rate Turn Table
高精度低速回转台自动化检定方法与实现 - The Inertia and dynamics coupling of the three axis turn table of the physical simulation test facility are analyzed, and mathematical models are established.
在对对接全物理仿真试验台三维转动装置的惯量耦合和动力学耦合进行分析基础上，建立了相关数学公式。 - In the study of turn-table servo system, the model and structure of simulator are introduced at first.
在转台伺服系统的研究中，首先分析了转台的数学模型； - Effects of Turn Table Errors on the Hardware In-the-Loop Simulations of Spinning Missiles
转台误差对旋转导弹半实物仿真的影响 - Turn table is an important ground simulation equipment used in aeronautic and astronautic industry.
转台是航空航天工业中重要的地面仿真设备。 - Wavelet optimization design and friction test for a two DOF turn table
基于小波的二维转动装置优化设计与摩擦试验研究 - From the relations between Inertia and angles, suggestions that reduce inertia coupling are made for the design of the three axis turn table.
根据转动惯量与转角之间的关系，提出了一些减小惯量耦合的建议，为转动装置的设计提供了依据。 - For protecting stayed cables, nylon ropes are adopted when PE cables are erected, self-made vehicle with leading-guide turn table is adopted when transported, and braking device is set on discharging-shrinking table additionally.
为保护斜拉索PE保护层，斜拉索吊装时采用尼龙绳，运输采用自制的运索平车，运索平车设有导向转盘，放缩盘增设刹车装置。 - Study of the Inertia and Dynamics Coupling of There Axis Turn Table
三维转动装置惯量耦合和动力学耦合研究 - Tracking Control Research of Three-axis Turn table
三轴转台跟踪控制研究 - Dynamic Characteristics of the Aerostatic Bearing on a Turn Table for Precision Measurement
精密测试转台空气静压轴承动态特征 - This method was compared with the dynamic test turn table method based on the principles of the gyroscope detection method.
根据光纤陀螺的检测原理，分析了该测试方法与角振动台测试法的等效性。 - Dynamics coupling between frames of a three axis turn-table is analysised and calculated in this paper and a general dynamical equation is given.
本文对三轴转台框架间的动力学耦合问题进行了分析和计算，并给出了三轴转台动力学一般方程。 - With this method, adaptive friction compensation design for inner loop control system of the turn table is done. Columb and viscous friction compensator is obtained, and the friction compensation problem when the turn table inner loop can not accurately provide velocity signal is solved.
利用该方法进行了转台内环控制系统的自适应摩擦补偿设计，得到了库仑、粘滞摩擦补偿器，解决了转台低速运行时不能准确得到速度信号的摩擦补偿问题。 - Adjustments are done on beam expanding collimation laser, laser light source, camera to be calibrated, and 6D turn table. 3.
因此对六维转台进行了选择，并分别对扩束准直激光器、校正相机、激光器光源进行调整。 - The mathematical models of turn table and power amplifier are established according to Kinematics and Dynamics. Secondly, the position control system is accomplished.
运用运动学和动力学的有关知识建立了双轴转台和功率放大环节的数学模型。其次，实现精密位置控制系统。 - Secondly, the threshold testing methods of digital close loop fiber optic gyro system are introduced in detail. Speed turn table method and turntable method are mainly introduced and compared.
其次，本文对数字闭环光纤陀螺系统的阈值测试方法进行了详细介绍，主要介绍了速率转台法和回转台法，并对两种方法进行简单比较。 - The theory of turn table servo method for gyro testing is discussed. The hardware circuits of gyro servo control system are designed and debugged, and the gyro servo control system is accomplished. Finally, the sinusoidal control system is researched and accomplished.
研究了转台伺服法测试陀螺漂移的原理，设计并调试了陀螺伺服系统的硬件电路，实现了转台陀螺伺服控制系统。最后，实现正弦摇摆控制系统。